Corrosion Inhibitor Rinse (Compare to HoldTight 102)

Troy 2827 Corrosion Inhibitor Rinse (Compare to HoldTight 102) PRODUCT DESCRIPTION 5 Gallon Pail TROY 2827 is a proprietary, non-foaming, water soluble rust inhibitor that can replace sodium nitrate for use in preventing flash rusting as well as rinsing salts and other contaminants prior to painting. TROY 2827 is effective on cast iron, steel and other ferrous metals. This product is a must when using a DUSTLESS BLAST SYSTEM or WET BLASTER. WARNING : CONTAINS AMINE. CAN CAUSE IRRITATION. HANDLING PRECAUTIONS Do not get in eyes, on skin or on clothing. Avoid breathing mists or sprays. Do not take internally. Wash thoroughly after handling. Keep container closed when not in use. Always wear rubber gloves, goggles and protective clothing when contact is likely. Always have a safety shower and eye wash fountain available for first aid. KEEP OUT OF REACH OF CHILDREN – FOR INDUSTRIAL USE ONLY SEE MATERIAL SAFETY DATA SHEET FOR ADDITIONAL INFORMATION PERTAINING TO THIS PRODUCT.

TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 1 GALLON JUG

TROY 2817 SPRAY WAND PHOSPHATIZER SIMULTANEOUSLY CLEANS AND PHOSPHATIZES FERROUS SURFACES WHILE UTILIZING A FLASH RUST INHIBITOR. 2817 CAN BE APPLIED USING STEAM, SPRAY WAND OR DIP TANK. WHY BUY 3 SEPARATE PRODUCTS WHEN YOU CAN GET IT ALL DONE AT ONCE AT A THIRD THE COST. 2817 IS ALSO VERY EFFECTIVE ON GALVANIZED AND ALUMINUM METALS 2817 IS PART OF TROY CHEMICALS KOOL BLUE LINE. THIS IS A "GREEN" PRODUCT AND IS NON HAZARDOUS 2817 IS AVAILABLE IN 55 GALLON DRUMS, 5 GALLON PAILS AND 1 GALLON JUGS. BENEFITS OF USING A PHOSPHATE PRE-TREATMENT Improved Powder Coating Adhesion – the treated surface is made rough, and therefore makes sticking not just easier but more effective. Improved Coating Base – because of greater adhesion, the metal part is more effectively protected and a longer useable life. Improved Corrosion Inhibition – with the powder coating sticking more effectively, air and moisture are both more effectively locked out. Thus, the risk of rusting and corrosive damage is drastically reduced. Improved Finish – with the coating sticking so effectively it envelops the metal surface, the quality of finish is also improved. And with a smooth, uniform finish, cleaning becomes easier too. Neutralizes Surface pH – leaving a metal surface untreated leaves it susceptible to a host of faults that allow negative and positive charges to coexist. With more than 45 years of experience, Troy Chemical is a leading manufacturer of metal pre-treatment chemicals and powder coating pre-treatment solutions. KOOL BLUE-designated products are ideal for use as a powder coating pre-treatment chemical and can provide energy-efficiency and a more environmentally-preferred and performance-enhanced system to reduce the environmental footprint. Our strategies minimize chemical, energy and water usage during the metal pre-treatment process to keep you operating at peak efficiency while further minimizing operating costs and environmental impact.

TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 5 GALLON PAIL

TROY 2817 SPRAY WAND PHOSPHATIZER SIMULTANEOUSLY CLEANS AND PHOSPHATIZES FERROUS SURFACES WHILE UTILIZING A FLASH RUST INHIBITOR. 2817 CAN BE APPLIED USING STEAM, SPRAY WAND OR DIP TANK. WHY BUY 3 SEPARATE PRODUCTS WHEN YOU CAN GET IT ALL DONE AT ONCE AT A THIRD THE COST. 2817 IS ALSO VERY EFFECTIVE ON GALVANIZED AND ALUMINUM METALS 2817 IS PART OF TROY CHEMICALS KOOL BLUE LINE. THIS IS A "GREEN" PRODUCT AND IS NON HAZARDOUS 2817 IS AVAILABLE IN 55 GALLON DRUMS, 5 GALLON PAILS AND 1 GALLON JUGS. BENEFITS OF USING A PHOSPHATE PRE-TREATMENT Improved Powder Coating Adhesion – the treated surface is made rough, and therefore makes sticking not just easier but more effective. Improved Coating Base – because of greater adhesion, the metal part is more effectively protected and a longer useable life. Improved Corrosion Inhibition – with the powder coating sticking more effectively, air and moisture are both more effectively locked out. Thus, the risk of rusting and corrosive damage is drastically reduced. Improved Finish – with the coating sticking so effectively it envelops the metal surface, the quality of finish is also improved. And with a smooth, uniform finish, cleaning becomes easier too. Neutralizes Surface pH – leaving a metal surface untreated leaves it susceptible to a host of faults that allow negative and positive charges to coexist. With more than 45 years of experience, Troy Chemical is a leading manufacturer of metal pre-treatment chemicals and powder coating pre-treatment solutions. KOOL BLUE-designated products are ideal for use as a powder coating pre-treatment chemical and can provide energy-efficiency and a more environmentally-preferred and performance-enhanced system to reduce the environmental footprint. Our strategies minimize chemical, energy and water usage during the metal pre-treatment process to keep you operating at peak efficiency while further minimizing operating costs and environmental impact.

TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 55 GALLON DRUM

TROY 2817 SPRAY WAND PHOSPHATIZER SIMULTANEOUSLY CLEANS AND PHOSPHATIZES FERROUS SURFACES WHILE UTILIZING A FLASH RUST INHIBITOR. 2817 CAN BE APPLIED USING STEAM, SPRAY WAND OR DIP TANK. WHY BUY 3 SEPARATE PRODUCTS WHEN YOU CAN GET IT ALL DONE AT ONCE AT A THIRD THE COST. 2817 IS ALSO VERY EFFECTIVE ON GALVANIZED AND ALUMINUM METALS 2817 IS PART OF TROY CHEMICALS KOOL BLUE LINE. THIS IS A "GREEN" PRODUCT AND IS NON HAZARDOUS 2817 IS AVAILABLE IN 55 GALLON DRUMS, 5 GALLON PAILS AND 1 GALLON JUGS. **** YOU MUST CALL PRIOR TO PURCHASE TO OBTAIN FREIGHT COST **** BENEFITS OF USING A PHOSPHATE PRE-TREATMENT Improved Powder Coating Adhesion – the treated surface is made rough, and therefore makes sticking not just easier but more effective. Improved Coating Base – because of greater adhesion, the metal part is more effectively protected and a longer useable life. Improved Corrosion Inhibition – with the powder coating sticking more effectively, air and moisture are both more effectively locked out. Thus, the risk of rusting and corrosive damage is drastically reduced. Improved Finish – with the coating sticking so effectively it envelops the metal surface, the quality of finish is also improved. And with a smooth, uniform finish, cleaning becomes easier too. Neutralizes Surface pH – leaving a metal surface untreated leaves it susceptible to a host of faults that allow negative and positive charges to coexist. With more than 45 years of experience, Troy Chemical is a leading manufacturer of metal pre-treatment chemicals and powder coating pre-treatment solutions. KOOL BLUE-designated products are ideal for use as a powder coating pre-treatment chemical and can provide energy-efficiency and a more environmentally-preferred and performance-enhanced system to reduce the environmental footprint. Our strategies minimize chemical, energy and water usage during the metal pre-treatment process to keep you operating at peak efficiency while further minimizing operating costs and environmental impact.

CHEMICALS – Pro Powder & Abrasive Supply

WE SELL A COMPLETE LINE OF POWDER COATING SURFACE PREPARATION CHEMICALS AND STRIPPERS

Sale!

Corrosion Inhibitor Rinse (Compare to HoldTight 102)

~~$185.00~~ $145.00

Select options Details
TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 1 GALLON JUG

$24.99

Add to cart Details
TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 5 GALLON PAIL

$95.99

Add to cart Details
TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 55 GALLON DRUM

$595.00

Add to cart Details