TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 55 GALLON DRUM

//TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 55 GALLON DRUM

TROY 2817 PRE-TREATMENT PHOSPHATIZER, CLEANER 55 GALLON DRUM

$595.00

Compare

Description

 

 

 

TROY 2817 SPRAY WAND PHOSPHATIZER SIMULTANEOUSLY CLEANS AND PHOSPHATIZES FERROUS SURFACES WHILE UTILIZING A FLASH RUST INHIBITOR. 2817 CAN BE APPLIED USING STEAM,  SPRAY WAND OR DIP TANK.

WHY BUY 3 SEPARATE PRODUCTS WHEN YOU CAN GET IT ALL DONE AT ONCE AT A THIRD THE COST.

2817 IS ALSO VERY EFFECTIVE ON GALVANIZED AND ALUMINUM METALS

2817 IS PART OF TROY CHEMICALS KOOL BLUE LINE. THIS IS A “GREEN” PRODUCT AND IS NON HAZARDOUS

2817 IS AVAILABLE IN 55 GALLON DRUMS,  5 GALLON PAILS AND                    1 GALLON JUGS.

**** YOU MUST CALL PRIOR TO PURCHASE TO OBTAIN FREIGHT COST ****

 

BENEFITS OF USING A PHOSPHATE PRE-TREATMENT

Improved Powder Coating Adhesion – the treated surface is made rough, and therefore makes sticking not just easier but more effective.

Improved Coating Base – because of greater adhesion, the metal part is more effectively protected and a longer useable life.

Improved Corrosion Inhibition – with the powder coating sticking more effectively, air and moisture are both more effectively locked out. Thus, the risk of rusting and corrosive damage is drastically reduced.

Improved Finish – with the coating sticking so effectively it envelops the metal surface, the quality of finish is also improved. And with a smooth, uniform finish, cleaning becomes easier too.

Neutralizes Surface pH – leaving a metal surface untreated leaves it susceptible to a host of faults that allow negative and positive charges to coexist.

With more than 45 years of experience, Troy Chemical is a leading manufacturer of metal pre-treatment chemicals and powder coating pre-treatment solutions.

KOOL BLUE-designated products are ideal for use as a powder coating pre-treatment chemical and can provide energy-efficiency and a more environmentally-preferred and performance-enhanced system to reduce the environmental footprint. Our strategies minimize chemical, energy and water usage during the metal pre-treatment process to keep you operating at peak efficiency while further minimizing operating costs and environmental impact.